- Intimate
- >
- RFSU Ovulation Test 14 pcs
RFSU Ovulation Test 14 pcs
SKU:
7310572100125
$24.99
$24.99
Unavailable
per item
RFSU Ovulation Test is easy to perform and you get a clear message in minutes. The ovulation test can measure very low hormone levels and therefore has high reliability.
The ovulation test is the same type used by midwives and gynecologists and has been developed in collaboration with the RFSU Clinic.
Here's how to do the test
You should perform the test at approximately the same time every day. Do not use the first morning urine as LH levels are not detected in the urine until later in the day. The most appropriate time is from 10am. 10:00 and 20:00 when LH secretion is greatest in the body. It is important that you do not urinate for at least 4 hours before performing the test to avoid dilution of the LH hormone in the urine. Also, avoid drinking large amounts of fluid 2 hours before testing.
1. Collect urine in a clean and dry container. A few centimeters from the bottom is enough.
2. Allow the sealed package with the test strip and urine sample to reach room temperature (18-30 ° C, only takes a few minutes).
3. Have a watch in readiness.
4. Open the package along the mark and use the test strip as soon as possible.
5. Hold the colored part of the stick. Dip the other part with downward arrows in the urine. Do not dip deeper than the max line. Pick up the stick after 5 seconds and place it flat on a clean, dry surface.
6. Wait for 10 minutes and leave the stick completely still. One or two color bands appear against a light background in the field next to the colored section. Don't read any results after 30 minutes.
Here's how to read the results
Positive result - LH increase
If two colored lines appear and the test line is as strong or stronger than the control line, LH increase has been detected. You are most fertile for the next 2 days. If you have intercourse for the next 48 hours, your chances of becoming pregnant increase. You can save any remaining tests if you need to retest.
Negative result - no LH increase
If only one colored line appears in the control area or if the test line appears but is lighter than the control line, no LH increase in the urine is detected. Keep testing for days to come. If you were unable to detect any LH increment in this cycle, it may be due to the following;
- You may not have had an LH peak in this bike. It is normal for the ovulation to skip at some point.
- You may have tested too early or too late in the cycle.
- The amount of LH in the urine may have been too low.
Invalid result
If no line is displayed, perform a new test and follow the instructions carefully. This may be because you did not perform the test correctly. If the problem persists, contact RFSU.
The ovulation test is the same type used by midwives and gynecologists and has been developed in collaboration with the RFSU Clinic.
Here's how to do the test
You should perform the test at approximately the same time every day. Do not use the first morning urine as LH levels are not detected in the urine until later in the day. The most appropriate time is from 10am. 10:00 and 20:00 when LH secretion is greatest in the body. It is important that you do not urinate for at least 4 hours before performing the test to avoid dilution of the LH hormone in the urine. Also, avoid drinking large amounts of fluid 2 hours before testing.
1. Collect urine in a clean and dry container. A few centimeters from the bottom is enough.
2. Allow the sealed package with the test strip and urine sample to reach room temperature (18-30 ° C, only takes a few minutes).
3. Have a watch in readiness.
4. Open the package along the mark and use the test strip as soon as possible.
5. Hold the colored part of the stick. Dip the other part with downward arrows in the urine. Do not dip deeper than the max line. Pick up the stick after 5 seconds and place it flat on a clean, dry surface.
6. Wait for 10 minutes and leave the stick completely still. One or two color bands appear against a light background in the field next to the colored section. Don't read any results after 30 minutes.
Here's how to read the results
Positive result - LH increase
If two colored lines appear and the test line is as strong or stronger than the control line, LH increase has been detected. You are most fertile for the next 2 days. If you have intercourse for the next 48 hours, your chances of becoming pregnant increase. You can save any remaining tests if you need to retest.
Negative result - no LH increase
If only one colored line appears in the control area or if the test line appears but is lighter than the control line, no LH increase in the urine is detected. Keep testing for days to come. If you were unable to detect any LH increment in this cycle, it may be due to the following;
- You may not have had an LH peak in this bike. It is normal for the ovulation to skip at some point.
- You may have tested too early or too late in the cycle.
- The amount of LH in the urine may have been too low.
Invalid result
If no line is displayed, perform a new test and follow the instructions carefully. This may be because you did not perform the test correctly. If the problem persists, contact RFSU.